Pent Roof Sheds - Pent Shed
The doors on these sheds are fully ledge & braced to minimise dropping (which would cause difficulties in closing) and are fitted using three sturdy 12” BZP plated T hinges. All doors are supplied with lock and key as standard.
Note: As standard, we hinge the doors on the the right hand side but we can also hinge on the left if required. Please select the Door Hinge option above if left hand hinge is required.
Also Note: Below is a diagram of the different Door Position options. Pent doors are usually positioned in option A as standard. Something to be aware of, option B is only available on sheds with a length of 8' and above i.e. 8' x 6', 10' x 7'. Please select the Door Position of your choice - there is no extra charge for this option.

MEASUREMENTS:
Height at front (high side) 6'11¼" Building Sizes up to 10' x 6'
Height at front (high side) 7'6½" Building Sizes 10' x 7' and over
Height at rear (low side) 6'3¼" Building Sizes up to 10' x 6'
Height at rear (low side) 6'6½" Building Sizes 10' x 7' and over
DOOR:
30" or 36" width
WINDOW:
Measuring 3' 4" x 2' 3" (1.01m x 0.68m)
FRAMING:
1.3/4" x 1.1/8" Buiding sizes up to 10' x 6'
1.3/4" x 1.3/4" Building sizes 10' x 7' and over
ROOF OVERHANG:
4 ½" (11.5cm) all around
GLAZING:
Supplied with 3mm horticultural glass






